Port-channel load-balance – Allied Telesis AT-FS970M Series User Manual

Page 719

AT-FS970M Switch Command Line User’s Guide

719

PORT-CHANNEL LOAD-BALANCE

Syntax

Parameters

src-mac

Specifies source MAC address as the load distribution method.

dst-mac

Specifies destination MAC address.

src-dst-mac

Specifies source address/destination MAC address.

src-ip

Specifies source IP address.

dst-ip

Specifies destination IP address.

src-dst-ip

Specifies source address/destination IP address.

Mode

Static Port Trunk Interface mode

Description

Use this command to specify the load distribution methods of static port
trunks. The load distribution methods determine the manner in which the
switch distributes packets among the ports of a trunk.

This command is found in the Static Port Trunk Interface mode. To enter
the mode, use the INTERFACE TRUNK command. The format of the
command is the keyword INTERFACE followed by name of a trunk you
want to configure. The name of a static port truck consists of “sa” followed
by a trunk’s ID number. You can configure just one trunk at a time.