beautypg.com

Allied Telesis AT-FS970M Series User Manual

Page 1071

background image

AT-FS970M Switch Command Line User’s Guide

1071

“DOT1X SUPPLICANT-PARAMS
MAX-START” on page 1098

Port Interface

Specifies the maximum number of
times a supplicant sends EAPOL-Start
frames before assuming that there is
no authenticator present.

“DOT1X SUPPLICANT-PARAMS
PASSWORD” on page 1099

Port Interface

Assigns a password to a supplicant
port.

“DOT1X SUPPLICANT-PARAMS
USERNAME” on page 1100

Port Interface

Assigns a username to a supplicant
port.

“DOT1X TIMEOUT TX-PERIOD” on
page 1101

Port Interface

Sets the amount of time the switch
waits for a reply from a supplicant to
an EAP-request/identity frame.

“NO AAA AUTHENTICATION DOT1X
DEFAULT GROUP RADIUS” on
page 1102

Global
Configuration

Disables 802.1x port-based network
access control on the switch.

“NO AUTH DYNAMIC-VLAN-
CREATION” on page 1103

Port Interface

Disables dynamic VLAN assignments
of authenticator ports.

“NO AUTH GUEST-VLAN” on
page 1104

Port Interface

Disables the Guest VLAN feature on
an authenticator port.

“NO AUTH REAUTHENTICATION” on
page 1105

Port Interface

Removes reauthentication from
authenticator ports.

“NO AUTH-MAC ENABLE” on
page 1106

Port Interface

Deactivates MAC address-based
authentication on authenticator ports.

“NO DOT1X PORT-CONTROL” on
page 1107

Port Interface

Removes ports from the authenticator
role.

“NO DOT1X PORT-CONTROL
SUPPLICANT” on page 1108

Port Interface

Removes ports from the supplicant
role.

“SHOW AUTH-MAC INTERFACE” on
page 1109

Privileged Exec

Displays the parameter settings of
authenticator ports.

“SHOW AUTH-MAC
SESSIONSTATISTICS INTERFACE”
on page 1110

Privileged Exec

Displays the session status of the
authenticator ports.

“SHOW AUTH-MAC STATISTICS
INTERFACE” on page 1111

Privileged Exec

Displays the authentication statistics
of authenticator ports.

“SHOW AUTH-MAC SUPPLICANT
INTERFACE” on page 1112

Privileged Exec

Displays the supplicant state on
authenticator ports.

Table 113. 802.1x Port-based Network Access Control Commands (Continued)

Command

Mode

Description