Allied Telesis AT-FS970M Series - Manual (Page 204)

Chapter 10: Port Parameter Commands
204
BPLIMIT
Syntax
bplimit bplimit
Parameters
bplimit
Specifies the number of cells for backpressure. A cell represents
128 bytes. The range is 1 to 7935 cells. The default value is 7935
cells.
Mode
Port Interface mode
Description
Use this command to specify a threshold level for backpressure on a port.
Confirmation Command
“SHOW RUNNING-CONFIG” on page 166
This example sets the threshold for backpressure on ports 15 and 20 to
7000 cells:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.15,port1.0.20
awplus(config-if)# bplimit 7000