Allied Telesis AT-FS970M Series - Manual (Page 737)

737
Chapter 50
LACP Commands
The LACP port trunk commands are summarized in Table 85 and
described in detail within the chapter.
Table 85. LACP Port Trunk Commands
Command Mode Description
“CHANNEL-GROUP” on page 738 Port Interface Creates new aggregators and adds
ports to existing aggregators.
“LACP SYSTEM-PRIORITY” on
page 740 Global
Configuration Sets the LACP system priority value
for the switch.
“NO CHANNEL-GROUP” on
page 741 Port Interface Removes ports from aggregators and
deletes aggregators.
“PORT-CHANNEL LOAD-BALANCE”
on page 742 LACP Port
Trunk Interface Sets the load distribution method.
“SHOW ETHERCHANNEL” on
page 744 Privileged Exec Displays the ports of the aggregators
on the switch.
“SHOW ETHERCHANNEL DETAIL”
on page 745 Privileged Exec Displays the states of the ports of the
aggregators.
“SHOW ETHERCHANNEL
SUMMARY” on page 747 Privileged Exec Displays detailed information about
the aggregators.
“SHOW LACP SYS-ID” on page 748 Privileged Exec Displays the LACP priority value and
MAC address of the switch.
“SHOW PORT ETHERCHANNEL” on
page 749 Privileged Exec Displays the LACP port information.