Allied Telesis AT-FS970M Series - Manual (Page 667)

667
Chapter 44
Event Log Commands
The event log commands are summarized in Table 76 and described in
detail within this chapter.
Table 76. Event Log Commands
Command Mode Description
“CLEAR LOG” on page 669 Privileged Exec Deletes all entries in the buffered and
permanent logs.
“CLEAR LOG BUFFERED” on
page 670 Privileged Exec Deletes all entries in the buffered log.
“CLEAR LOG PERMANENT” on
page 671 Privileged Exec Deletes all entries in the permanent
log.
“LOG BUFFERED” on page 672 Global
Configuration Specifies the types of event messages
to be stored in the buffered log.
“LOG CONSOLE” on page 674 Global
Configuration Specifies the types of event messages
to be sent to the console.
“LOG PERMANENT” on page 676 Global
Configuration Specifies the types of event messages
to be stored in the permanent log.
“NO LOG BUFFERED” on page 677 Global
Configuration Cancels the settings set by the LOG
BUFFERED command.
“NO LOG CONSOLE” on page 679 Global Config
ration Cancels the settings set by the LOG
CONSOLE command.
“NO LOG PERMANENT” on page 680 Global
Configuration
Cancels the settings set by the LOG
PERMANENT command.
“SHOW LOG” on page 682 Privileged Exec Displays the event messages in the
buffered log from oldest to newest.
“SHOW LOG CONFIG” on page 685 Privileged Exec Displays the configuration of the event
logs.
“SHOW LOG PERMANENT” on
page 687 Privileged Exec Displays the event messages in the
permanent log.
“SHOW LOG PERMANENT TAIL” on
page 688 Privileged Exec Displays a limited number of the event
messages in the permanent log.