Allied Telesis AT-FS970M Series - Manual (Page 567)

567
Chapter 37
File Transfer Commands
The file transfer commands are summarized in Table 58 and described in
detail within the chapter.
Table 58. File Transfer Commands
Command Mode Description
“COPY FILENAME ZMODEM” on
page 568 Privileged Exec Uses Zmodem to upload files from the
file system in the switch.
“COPY FLASH TFTP” on page 569 Privileged Exec Uses TFTP to upload files from the
switch.
“COPY TFTP FLASH” on page 570 Privileged Exec Uses TFTP to download new versions
of the management software, boot
configuration files, or CA certificates to
the switch.
“COPY ZMODEM” on page 572 Privileged Exec Uses Zmodem to download new boot
configuration files or CA certificates to
the switch.
“UPLOAD IMAGE REMOTELIST” on
page 573 Global
Configuration Uses enhanced stacking to download
the management software on the
command switch to other switches.