Allied Telesis AT-FS970M Series - Manual (Page 1095)

AT-FS970M Switch Command Line User’s Guide
1095
DOT1X PORT-CONTROL SUPPLICANT
Syntax
dot1x port-control supplicant
Parameters
None
Mode
Port Interface mode
Description
Use this command to set the ports to the 802.1x port-based supplicant
role.
Before setting a port to the 802.1x port-based supplicant role, port-based
network access control must first be enabled on the switch using the AAA
AUTHENTICATION DOT1X DEFAULT GROUP RADIUS command. Refer
to “AAA AUTHENTICATION DOT1X DEFAULT GROUP RADIUS” on
page 1073.
Confirmation Command
“SHOW RUNNING-CONFIG INTERFACE” on page 240
Example
This example sets ports 1.0.11, 1.0.15, and 1.0.19 to the supplicant role:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.11,port1.0.15,port1.0.19
awplus(config-if)# dot1x port-control supplicant