beautypg.com

Enabling qos on the switch 8, Table 190. enabling qos on the switch 8, Enabling qos on the switch – Allied Telesis AT-FS970M Series User Manual

Page 1628

background image

Chapter 98: Quality of Service (QoS)

1628

Enabling QoS on the Switch

By default, the QoS feature is disabled on the switch. You must enable the
QoS feature before you attempt any QoS configuration.

To enable the QoS feature on the switch, do the following:

Table 190. Enabling QoS on the Switch

Command

Description

awplus> enable

Enter the Privileged Executive mode from the User
Executive mode.

awplus# configure terminal

Enter the Global Configuration mode.

awplus(config)# mls qos enable

Enable the QoS feature on the switch.