Allied Telesis AT-FS970M Series - Manual (Page 1292)

Chapter 77: LLDP and LLDP-MED Commands
1292
SHOW LLDP STATISTICS
Syntax
show lldp statistics
Parameters
None
Mode
User Exec mode and Privileged Exec mode
Description
Use this command to display the LLDP statistics for the switch. Here is an
example of the information.
Figure 218. SHOW LLDP STATISTICS Command
The information the command displays is explained in Table 133.
Table 133. SHOW LLDP STATISTICS Command
Statistic Description
Frame Out Number of LLDPDU frames transmitted.
Frame In Number of LLDPDU frames received.
Frame In Errored Number of invalid LLDPDU frames
received.
Frame In Dropped Number of LLDPDU frames received and
discarded.
Global LLDP Packet and Event counters:
Frames: Out ................... 345
In .................... 423
In Errored ............ 0
In Dropped ............ 0
TLVs: Unrecognized .......... 0
Discarded ............. 0
Neighbors: New Entries ........... 20
Deleted Entries ....... 20
Dropped Entries ....... 0
Entry Age-outs ........ 20