Displaying the active boot configuration file, Figure 112. show boot command – Allied Telesis AT-FS970M Series User Manual

Page 542

Text mode
Original mode

Chapter 34: Boot Configuration Files

542

Displaying the Active Boot Configuration File

To display the name of the active boot configuration file on the switch, go
to the Privileged Exec mode and enter the SHOW BOOT command. Here
is the command:

awplus# show boot

Here is an example of the information.

Figure 112. SHOW BOOT Command

The “Current boot config” field displays the name of the active boot
configuration file, which for the switch in the example is “switch2.cfg.” The
rest of the fields are defined in Table 57 on page 550.

Current software

: v2.1.1

Current boot image : v2.1.1
Backup boot image

: Not set

Default boot config: /cfg/boot.cfg
Current boot config: /cfg/switch2.cfg (file exists)