HP Systems Insight Manager - Manual (Page 617)

Description Data Type Column Name
The maximum number of server blades the enclosure can
contain INT dc_EnclosureMaxNumBladesY
Specifies if the fuse described is present in the system: Other
(1), Absent (2) and Present (3) NVARCHAR(32) dc_FusePresent
The condition of the fuse ( Other (1), Fuse status detection
is not supported, OK (2), Fuse is operating properly, Failed
(4), Fuse has been tripped or is not operating properly) NVARCHAR(32) dc_FuseCondition
DC_ProliantHost table
Description Data Type Column Name
LUID uniquely defining this table row BIGINT ProliantHost_LUID
Identifies the system ID for this row BIGINT NodeID
Identifies the snapshot ID for this row BIGINT SnapshotID
Equates to CIM_ComputerSystem NVARCHAR(256) dc_SystemCreationClassName
The value of CIM_ComputerSystem.Name where NodeID
is equal. NVARCHAR(256) dc_SystemName
This object represents the overall status of the server host
system represented by this MIB NVARCHAR(16) OverallCondition
An array of MIB status structures (Each structure is made
up of 4 octets. The first octet is the MIB presence. The
second octet is MIB condition. The third octet is MIB major
revision. The fourth octet is MIB minor revision. These blocks
of 4 octets each are index by the mib identifier just after
the HP enterprise (for example, in 1.3.6.1.232.11 mib,
the index is 11). The 4 octets in the first block (block 0) are
reserved for systems management and serve as an
aggregate of their MIBs.) NVARCHAR(512) MIBStatusArray
The globally unique identifier of this server (If the operating
system cannot determine a unique ID, it defaults the variable
to contain all 0's. The management station can then perform
a SET to this variable to provide the unique ID.) NVARCHAR(64) GUID
This item indicates the port used by the HP Insight
Management Agent INT WebManagementPort
The Automatic Server Recovery (ASR) feature status (If this
object is currently Other (1) or Not Available (2), all set
operations fail. Any attempt to set this object to Other (1)
or Not Available (2) by a management station fails. Setting
this object to Disabled (3) or Enabled (4) disables or
enables the ASR feature.) NVARCHAR(16) ASRStatus
The HP System ID; this value indicates the HP system ID of
the system board in this system (This ID replaces the product
ID used in older machines (cpqSiProductId). A value of 7Eh
for the cpqSiProductId indicates that the cpqSiSystemId
should be used to identify the HP system. A value of zero
(0) indicates that the system ID function is not supported on
this machine. In this case, the cpqSiProductId should be
used to identify the system.) INT SystemID
The system role; this is a settable free form text field
intended to be assigned by a remote console briefly
describing the system's function NVARCHAR(64) ServerRole
The system detailed description; this is a settable free form
text field intended to be assigned by a remote console
describing the system function in detail NVARCHAR(512) ServerRoleDetail
The date and time when the agents were last loaded BIGINT ConfigChangeDate
The total time (in minutes) the system has been in full
operation (while the server health supporting software was
running) BIGINT SystemUptime
Database tables 617