HP Systems Insight Manager - Manual (Page 103)

•
Specify additional system properties to use only if Identification fails on this system .
Includes:
•
System type
Click the down arrow and select the appropriate System type.
•
System subtype
Click the down arrow and select the appropriate System subtype. You can provide up to eight
different system subtypes.
•
Product model
This is a free form field and you can enter the system model number here.
•
WBEM Settings
•
User name
•
Password
If you do not want to use the default global values for the WBEM user name and password,
select Use Custom and enter custom values.
If you are manually discovering a storage system , ensure that the user name and password
of the SMI CIMOM are present in the global protocol settings, or enter them here as custom
values. Select Options
→Protocol Settings→Global Protocol Settings to view the global
settings.
For Windows-based systems, the user name should include the domain name, for example,
domainname\username.
Note: OpenWBEM is not supported.
•
SNMP Settings
If you do not want to use the default global values for the SNMP settings, select Use Custom,
and enter custom values.
•
Timeout (in seconds)
The amount of time HP SIM waits for an SNMP response when it sends a request to the
system. If a response is not received within the time interval, HP SIM might determine
that the system does not support SNMP. Decreasing this value can result in increased
network traffic because the rate of retry attempts is increased. Use caution when changing
Adding a system manually 103