Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 542)

490 Brocade Network Advisor SAN User Manual
53-1003154-01
Configuration file management
12
Keeping a copy past the defined age limit
NOTE
This feature requires a Trial or Licensed version.
1. Select Configure > Configuration File > Configuration File Manager.
The Configuration File Manager dialog box displays.
2. Select the check box under Keep for the configuration you want to preserve.
The configuration will be kept until it is manually deleted, or until the Keep check box is cleared
to enable the age limit again. The file marked as Baseline will be marked as Keep.
3. Click Apply to save changes.
Tracking changes from the baseline configuration
Use change tracking to compare the latest backup configuration file with the configuration that is
designated as the baseline.
NOTE
Change Tracking tab is not displayed for imported, unmanaged, or unmonitored switches.
1. Click the SAN tab.
2. Select Configure > Configuration File > Configuration File Manager.
The Configuration File Manager dialog box displays.
3. Click the Change Tracking tab.
The Change Tracking tab of the Configuration File Manager dialog box displays, as shown in
Figure 202 on page 491