Configuration policy manager scheduling, Configuration policy manager scheduling 6, Configuring a one-time – Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 1298: Configuration policy manager schedule, Configuring an hourly configuration policy, Manager schedule, Configuring a daily configuration policy
1246
Brocade Network Advisor SAN User Manual
53-1003154-01
Configuration policy manager scheduling
31
Configuration policy manager scheduling
You can schedule a configuration policy manager to run automatically. For step-by-step
instructions, refer to the following procedures:
•
“Configuring a one-time configuration policy manager schedule”
•
“Configuring an hourly configuration policy manager schedule”
•
“Configuring a daily configuration policy manager schedule”
•
“Configuring a weekly configuration policy manager schedule”
•
“Configuring a monthly configuration policy manager schedule”
Configuring a one-time configuration policy manager schedule
To configure a one-time schedule, complete the following steps.
1. Select One Time from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
3. Click the Date list to select a date from the calendar.
4. Click OK on the Schedule Properties dialog box.
To finish configuring the configuration policy manager, return to
Configuring an hourly configuration policy manager schedule
To configure an hourly schedule, complete the following steps.
1. Select Hourly from the Frequency list.
2. Select the minute past the hour you want deployment to run from the Minutes past the hour
list.
Where the minute value is from 00 through 59.
3. Click OK on the Schedule Properties dialog box.
To finish configuring the configuration policy manager, return to
Configuring a daily configuration policy manager schedule
To configure a daily deployment schedule, complete the following steps.
1. Select Daily from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.