Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 1529
Brocade Network Advisor SAN User Manual
1477
53-1003154-01
Viewing SAN device properties
E
2. To view port properties, select one of the following tabs.
The following port types are available depending on the selected device:
•
FC Ports
•
GigE Ports
•
IP Ports
•
iSCSI Ports
•
Virtual Sessions Ports
Sequence number
The sequence number of the switch.
Serial #
The hardware serial number.
Slot #
The slot number of the trunk.
Source IP Address
The IP address of the of the FCIP tunnel source device.
Speed (Gb/s)
The speed of the port in gigabits per second.
State
The device’s state, for example, online or offline.
Status
The operational status.
Switch Name
The switch name.
Switch IP
The switch IP address.
Switch WWN
The switch world wide name.
Tape Pipelining
Whether tape pipelining is on or off for the FCIP tunnel.
Tunnel ID
The tunnel identifier.
Type
The device type.
Unit Type
The unit type of the node.
Vendor
The product vendor.
# Virtual FCoE port count
The number of virtual FCoE ports on the device. There is a one-to-one
mapping of TE ports to virtual FCoE ports. Therefore, the number of
virtual session ports is one for directly connected devices.
VLAN #
The VLAN number of the FCIP tunnel.
VLAN Class of Service for Control
Connection
The VLAN class of service for the control connection of the FCIP tunnel.
VLAN Class of Service for Data
Connection
The VLAN class of service for the data connection of the FCIP tunnel.
VLAN ID
The VLAN identification number.
WWN
The world wide name of the device.
Add button
Click to add a user-defined property. For more information, refer to
Edit button
Click to edit a user-defined property. For more information, refer to
Delete button
Click to delete a user-defined property. For more information, refer to
TABLE 137
Device properties (Continued)
Field/Component
Description