Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1257)

Brocade Network Advisor SAN User Manual 1205
53-1003154-01
Predefined flow definition templates
29
Creating a flow definition from a template
The predefined flow templates is displayed only when you select a Flow Vision-capable switch port,
initiator port, or target port. Lists only the templates that are supported by the selected port.
1. Right-click a switch port, an initiator port, or a target port from the Connectivity Map or Product
List and select Flow Vision > Flow.
A list of the flow templates supported on the selected port displays.
2. Select the predefined flow template you want from the list, as shown in ( Figure 516 ).
FIGURE 516 List of preconfigured flow templates
The Add Flow - predefined_flow dialog box displays, as shown in ( Figure 517 ).
F_Ports
(connected to an
initiator or target) Learn Flows from Host Supported Not Supported v7.2.0 or later
Learn Flows on Port Supported Not Supported v7.2.0 or later
Monitor All Flows from Host Supported Supported v7.2.0 or later
Monitor Flows to LUN Supported Supported v7.2.0 or later
Local Flows Mirroring Supported Not Supported v7.3.0 or later
Learn Flows to Storage Supported Not Supported v7.2.0 or later
Monitor Flows by Frame Type Supported Supported v7.2.0 or later
Monitor All Flows to Storage Supported Supported v7.2.0 or later
TABLE 98 Predefined templates (Continued)
Port type Template name Platform support Required Fabric OS version
16 Gbps-capable port blade 8 Gbps-capable port blade