Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 368)

316 Brocade Network Advisor SAN User Manual
53-1003154-01
Performance monitors
7
Accessing additional data from the Top Port Utilization monitor
• Right-click a row in the monitor to access the shortcut menu available for the associated
device. For more information about shortcut menus, refer to
“Application menus” on
page 1411.
• Double-click a row to navigate to the Historical Graphs/Tables dialog box. For more
information, refer to
“Performance Data” on page 1067.
Bottom Port Utilization Percentage monitor
The Bottom Port Utilization Percentage monitor ( Figure 137 ) displays the bottom port utilization
percentages in a table.
FIGURE 137 Bottom Port Utilization Percentage monitor
The Top Port Utilization Percentage monitor includes the following data:
• Severity icon/monitor title — The worst severity of the data shown next to the monitor title.
• Port — The port affected by this monitor.
• Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) —
Displays one of the following:
- Connected Port — The ISL or IFL port on the connected device. Click to launch the switch
port properties dialog box.
- Initiator — The initiator port on the connected device. Click to launch the device properties
dialog box.
- Target — The target port on the connected device. Click to launch the device properties
dialog box.
• RX Port Utilization Percentage — The bottom receive port utilization percentages.
• TX Port Utilization Percentage — The bottom transmit port utilization percentages.
• Product — The product affected by this monitor.
• Type — The type of port (for example, U-Port).
• Identifier — The port identifier.
• Port Number — The port number.