Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 353)

Brocade Network Advisor SAN User Manual 301
53-1003154-01
Performance monitors
7
• Refreshed — The time of the last update for the monitor.
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to
“Editing a preconfigured performance monitor” on page 323.
Accessing additional data from the Top Port C3 Discards monitor
• Right-click a row in the monitor to access the shortcut menu available for the associated
device. For more information about shortcut menus, refer to
“SAN shortcut menus” on
page 1422.
• Double-click a row to navigate to the Historical Graphs/Tables dialog box. For more
information, refer to
“Performance Data” on page 1067.
Top Port C3 Discards RX TO monitor
The Top Port C3 Discards RX TO monitor ( Figure 128 ) displays the top ports with receive Class 3
frames received at this port and discarded at the transmission port due to timeout in a table.
FIGURE 128 Top Port C3 Discards RX TO monitor
The Top Port C3 Discards RX TO monitor includes the following data:
• Severity icon/monitor title — The worst severity of the data based on the error count shown
next to the monitor title.
• Port — The port affected by this monitor.
• Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) —
Displays one of the following:
- Connected Port — The ISL or IFL port on the connected device. Click to launch the switch
port properties dialog box.
- Initiator — The initiator port on the connected device. Click to launch the device properties
dialog box.
- Target — The target port on the connected device. Click to launch the device properties
dialog box.