Management configuration policy manager, Preconfigured configuration policy managers, Preconfigured configuration policy managers 7 – Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 1289
Brocade Network Advisor SAN User Manual
1237
53-1003154-01
Preconfigured configuration policy managers
31
-
Fabric plus VM Manager discovery (refer to
Make sure there are Brocade HBAs (with a 2.1 or later driver) on the host connected to the
fabric.
-
VM Manager plus Host discovery (refer to
Make sure there are Brocade HBAs (with a 2.1 or later driver) on the host.
Make sure you discover the associated fabrics.
Rule Violation Fix — If the configuration policy manager report shows a violation, the
Administrator can add redundant connections (either a host to attached fabrics or attached
fabrics to a target LUN or more inter-fabric routes) to establish a complete path from host to
target LUN.
Management configuration policy manager
The management configuration policy manager enables you to set a configuration policy manager
on the Management application.
Check to see if the server backup is enabled and working — This management configuration policy
manager enables you to determine if backup is enabled for the Management application server
and if the backup output directory is accessible and writable.
Server backup automatically backs up the Management application database on a user-defined
schedule.
Rule Violation Fix — If the configuration policy manager report shows a violation, the Administrator
can edit the backup configuration through the Options dialog box, Server Backup pane (Server >
Options). Refer to
Preconfigured configuration policy managers
The Management application provides preconfigured configuration policy managers. The
preconfigured configuration policy managers include the following:
Default SAN Policy — Available for SAN products and contains the following values:
•
Name — Default SAN Policy
•
Description — Default policy to run on all SAN targets
•
Frequency — Daily
•
Next Run — Next time the policy will run using the format:
example, Fri Jun 08 08:00:00 PST 2014.
•
Last Run — Empty
•
Result — Empty