Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1469)

Brocade Network Advisor SAN User Manual 1417
53-1003154-01
SAN main menus
A
Recommission — Select to recommission an individual
port or all ports on a blade or switch.
Routing — (Trial and Licensed version Only) Select to
manage a selected router.
Configuration — (Trial and Licensed version Only) Select to
view the R_Ports on a router.
Domain IDs — (Trial and Licensed version Only) Select to
configure the router domain IDs.
Security — Select to manage security.
L2 ACL — Select to configure Layer 2 Access Control Lists
on products and ports.
Switch Password Management — Select to manage
password.
Swap Blades — (Trial and Licensed version Only) Select to
swap blades.
Virtual Fabric — (Trial and Licensed version Only) Select to
configure logical switches for your SAN.
Enable — (Trial and Licensed version Only) Select to
enable virtual fabrics for your SAN.
Disable — (Trial and Licensed version Only) Select to
disable virtual fabrics for your SAN.
Logical Switches — (Trial and Licensed version Only)
Select to configure logical switches for your SAN.
Locate Logical Switches — (Trial and Licensed version
Only) Select to locate logical switches.
Locate Chassis — (Trial and Licensed version Only) Select
to locate the chassis.
VLANs — Select to launch the VLAN Manager.
Zoning — Select to configure zones.
Fabric — Select to configure fabric zones.
LSAN Zoning (Device Sharing). (Trial and Licensed version
Only) Select to configure LSAN zones.
Set Change Limits — Select to set zone limits for zone
activation.
List Zone Members. (Trial and Licensed version Only)
Select to display all members in a zone.
Menu Command Command Options