Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1271)

Brocade Network Advisor SAN User Manual 1219
53-1003154-01
Flow Vision interoperability with other features
29
3. Complete the flow definition using one of the following procedures:
• “Creating a Flow Monitor flow definition” on page 1140"
• “Creating a Flow Generator flow definition” on page 1181"
• “Creating a Flow Mirror flow definition” on page 1191"
Dashboard integration with Flow Vision
You can use the Dashboard to monitor flows.
Monitoring flows from the Dashboard
You can create a flow monitor from a performance graph ( “Monitoring flows using a performance
graph” on page 1220") or by creating a user-defined performance monitor ( “Configuring a
user-defined traffic flow performance monitor” on page 434").
Figure 525 shows a flow performance monitor.
FIGURE 525 Flow performance monitor
Target Target Switch = Selected port's connected switch
Source Device = * if port is on a 16-Gbps switch, otherwise empty
Destination Device = Target port ID
Ingress Port = Selected port's connected switch port number
Direction = Bidirectional
Row other than the first or last row Target Switch = Selected switch
Source Device = * if port is on a 16-Gbps switch, otherwise empty
Destination Device = * if port is on a 16-Gbps switch, otherwise empty
Ingress Port = Selected port number
Direction = Bidirectional
TABLE 103 Add Flow Definition dialog box options populated per port connectivity row selection
Row selected Options populated