Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 283)

Brocade Network Advisor SAN User Manual 231
53-1003154-01
Events
6
• Port Type — Displays the type of port, for example, U_port.
• Port WWN — Displays the port’s world wide name.
• Protocol — Displays the network protocol, for example, Fibre Channel.
• Long Distance Settings — Displays whether the connection is considered to be normal or
longer distance.
• Forward Error Correction(FEC) — Displays whether FEC is enabled or disabled.
• Encryption — Displays whether encryption is enabled or disabled.
• Compression — Displays whether compression is enabled or disabled.
• NPIV Enabled — Displays whether the port is NPIV enabled or not.
• Connected Switch — Displays the name of the connected switch.
• Attached Port# — Displays the port number of the attached product.
• Calculated Status — Displays the calculated operational status.
• Zone Alias — Displays the zone alias of the port.
For GigE port properties, the Details area displays the following data for the selected port.
• Speed (Gb/s) — Displays the port speed, in Gbits per second.
• LAG ID — Displays the link aggregation group identifier.
• L2 Mode — Displays the Layer 2 mode. Options include Access, Converged, or Trunk.
• Routing Policy — Displays the routing policy configured on the switch.
• VLAN ID — Displays the VLAN identification number.
• IPSEC Supported — Displays the IPSec policy number.
Events
Click the Events icon to display the Events page.
FIGURE 97 Events page
The Events page contains the following fields and components:
• Scope — Only displays when you access this page from the Events widget. Displays the network
scope and time scope configured for the dashboard. Click Clear Scope to clear the network
and time scope and display all events.