Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 215)

Brocade Network Advisor SAN User Manual 163
53-1003154-01
User profiles
5
Configuring e-mail notification
To configure and enable e-mail notification, complete the following steps.
1. Select Server > User Profile.
The User Profile dialog box displays.
2. Select the E-mail Notification - Enable check box to enable e-mail notification.
3. Click Filter to set up basic event filter.
For step-by-step instructions about setting up basic event filters, refer to “Setting up basic
event filtering” on page 1258.
4. Enter your e-mail, text message, or page address in the E-mail Address field.
Enter more than one e-mail address, separating each with a semi-colon. To send a text
message or page via e-mail, use the following format number@carrier.com, where number is
your phone number and carrier.com is the SMS server. For example, [email protected]
(text message) or [email protected] (page).
NOTE
Check with your carrier for the exact e-mail address.
5. Click OK on the User Profile dialog box.