Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 393)

Brocade Network Advisor SAN User Manual 341
53-1003154-01
User-defined performance monitors
7

FCIP
- Cumulative Compression Ratio — The cumulative compression ratio for the FCIP
tunnel.
- Latency — The latency for the FCIP tunnel.
- Dropped Packets — The number of dropped packets.
- Link Retransmits — The number of retransmitted links.
- Timeout Retransmits — The number of retransmits due to timeout.
- Fast Retransmits — The number of fast retransmits triggered.
- Duplicate Ack Received — The number of duplicate acknowledgements received.
- Window Size RTT — The window size round trip time.
- TCP Out of Order Segments — The number of segments received out of order.
- Slow Start Status — The number of slow starts.
- Current Compression Ratio — The current compression ratio for the FCIP tunnel.

IP
- Errors — The number of errors.
- Discards — The number of discarded frames.
- Receive EOF — The number of end-of-frames received.
- Underflow Errors — The number of underflow errors.
- Overflow Errors — The number of overflow errors.
- Alignment Errors — The number of alignment errors.
- Runtime Errors — The number of run time errors.
- Too Long Errors — The number of too long frame errors.

Wireless
- Dropped Events — The number of dropped events.
- MAC Errors — The number of MAC errors.
- Back Packets Received — The number of bad packets received.
- Tx Errors — The number of transmit errors.
• Product — The product affected by this monitor.
• Type — The type of port (for example, U-Port).
• Identifier — The port identifier.
• Port Number — The port number.
• State — The port state (for example, Enabled).
• Status — The port status (for example, Up).
3. Click Close.