Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1301)

Brocade Network Advisor SAN User Manual 1249
53-1003154-01
Viewing a configuration policy manager report
31
FIGURE 534 Policy_Name - Configuration Policy Manager Report
4. Review the report details (refer to “Viewing a configuration policy manager report” on
page 1249).
To export a report, refer to “Exporting a configuration policy manager report” on page 1252.
To e-mail a report, refer to “Exporting SAN reports” on page 1404.
5. Click the close button (X) on the Policy_Name - Configuration Policy Manager Report browser
window.
6. Click Close on the Configuration Policy Manager dialog box.
Viewing a configuration policy manager report
NOTE
You must run the configuration policy manager at least once before you can view a report.
To view an existing configuration policy manager report, complete the following steps.
1. Select Monitor > Configuration Policy Manager.
The Configuration Policy Manager dialog box displays.
2. Select the policy for which you want to view a report in the Monitors list.