Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 1542
1490
Brocade Network Advisor SAN User Manual
53-1003154-01
Host properties
E
Class of Service
The class of the port; for example, Class-2 or Class-3.
Switch
The name of the switch.
Fabric
The name of the Fabric.
VM Port Name
The port name of the virtual machine associated with the host.
Preboot Created
Indicates whether preboot was created on the virtual port.
PCI Function Index
The PCI function number associated with the physical port.
Fabric Assigned Address
The state (enabled or disabled) of the fabric assigned address for
the adapter.
WWN Source
The source of the world wide name. Options include:
Fabric — The WWN is assigned from the fabric. The fabric assigned
address must be enabled.
Factory — The WWN is assigned at the factory.
Hyper-V Virtual FC
Indicates if the port is a Hyper-V virtual FC port. For non-virtual ports,
the field displays as N/A.
NOTE: This property is applicable only to Windows server’s version
2012 and later. It is a special type of NPIV port that can be
presented directly to VMs in a Hyper-V environment.
Configuration
Configured State
Indicates whether the port is enabled or disabled.
Max Bandwidth
The maximum allowable bandwidth output for the selected port.
Operating State
Indicates whether the port is online or offline.
Configured Speed
The configured port speed.
Operating Speed
The speed at which the port is operating.
Max Speed Supported
The maximum speed that is supported on the port. For the FC port,
the maximum speed is 8 Gbps.
Configured Topology
The configured topology setting: auto, point-to-point, or loop.
Operating Topology
The operating topology setting: auto, point-to-point, or loop.
Boot over SAN
Indicates whether boot over SAN is enabled.
Receive BB Credits
The number of buffer credits received.
Transmit BB Credits
The number of buffer credits transmitted.
Frame Field Size
The frame size, in bytes, of the port.
Hardware Path
The hardware path of the HBA.
Virtual Port Count
The number of virtual ports associated with the HBA.
FEC State
The state of FEC (Forward Error Correction) is an
error recovery mechanism.
BB Credit Recovery
The status of Buffer to Buffer Credit Recovery.
Configured BBSCN Count
The count of configured buffe state change number.
Negotiated BBSCN Count
The count of negotiated buffer state change number.
TABLE 31
Adapter port properties (Continued)
Field
Description