Disabling connection utilization, Changing connection utilization percentages – Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 1166
1114
Brocade Network Advisor SAN User Manual
53-1003154-01
SAN connection utilization
28
The Historical Data Collection dialog box displays. To select the fabrics on which you want
to enable data collection, refer to
“Enabling historical performance collection for selected
If you click Close on the Historical Data Collection message, Historical Data Collection is
not enabled; however, the Utilization Legend still displays in the main window.
There is a 5-minute delay before the values are displayed.
Disabling connection utilization
To turn off the connection utilization, choose one of the following options while connection
utilization is enabled:
•
Select Monitor > Performance > View Utilization.
•
Press CTRL + U.
•
Click the Utilization icon (
).
The Utilization Legend is removed from the main interface window.
Changing connection utilization percentages
You can change the utilization percentages.
To change the utilization percentages, complete the following steps.
1. Click the change link in the Utilization Legend, as shown in
FIGURE 490
Utilization Legend in edit mode