Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1534)

1482 Brocade Network Advisor SAN User Manual
53-1003154-01
Viewing SAN device properties
E
3. Click OK on the Properties dialog box to close the dialog box.
Viewing port properties
The following port types are available depending on the device:
• FC Ports
• GigE Ports
• IP Ports
• iSCSI Ports
NOTE
iSCSI ports that have an FC Address of all zeros are inactive. All others are active.
• Virtual Sessions Ports
• Virtual FCoE Ports
To view a port’s properties, right-click a port and select Properties, or double-click the port.
The Port Properties dialog box displays ( Figure 589 ).
To add user-defined property labels, refer to “Adding a property field” on page 1492.
Fields containing a green triangle ( ) in the lower-right corner are editable.
Sessions button Select to display the Filer Sessions dialog box for the product.
Statistics button Select to display the Filer iSCSI Statistics dialog box for the product.
Storage Arrays The number of arrays containing LUNs masked to the server.
Storage Logins The number of unique filers to which hosts on this server are logged in.
Target Portals table Target portals of the product.
Total LUN Size (GB) The size in gigabytes (GB) of all unique LUNs (not LUN paths) masked to
the product.
Vendor The vendor of the product.
TABLE 139 iSCSI Properties (Continued)
Field Description