Fru monitoring category, Security monitoring category – Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 1393
Brocade Network Advisor SAN User Manual
1341
53-1003154-01
MAPS monitoring categories
33
FRU monitoring category
The FRU category enables you to define rules for field replaceable units (FRU), including ports,
power supplies, and flash memory.
lists measures in the FRU category and describes each measure. Possible states for all
FRU measures are faulty, inserted, on, off, ready, and up.
Security monitoring category
The Security category monitors different security violations on the switch and takes action based
on the configured thresholds and their actions.
lists measures in the Security category and describes what each measure indicates.
BB_FCR_CNT
Tracks the number of Fibre Channel routers present on the backbone fabric.
ZONE_CFGSZ_PER
Tracks the zone configuration size limit per switch.
TABLE 114
FRU measures
Measure
Description
Power Supplies (PS_STATE)
State of a power supply has changed.
Fans (FAN_STATE)
State of a fan has changed.
Blades (BLADE_STATE)
State of a blade has changed.
SFPs (SFP_STATE)
State of the SFP has changed.
WWN
State of a world wide name (WWN) card has changed.
TABLE 115
Security measures
Measure
Description
DCC violations (SEC_DCC)
An unauthorized device attempts to log in to a secure fabric.
HTTP violations (SEC_HTTP)
A browser access request reaches a secure switch from an unauthorized IP
address.
Illegal command (SEC_CMD)
Commands permitted only to the primary fabric configuration server (FCS)
are executed on another switch.
Incompatible security DB (SEC_IDB) Secure switches with different version stamps have been detected.
Login violations (SEC_LV)
Login violations that occur when a secure fabric detects a login failure.
Invalid certifications (SEC_CERT)
There is a missing or invalid certificate file.
No-FCS (SEC_FCS)
The switch has lost contact with the primary FCS.
SCC violations (SEC_SCC)
SCC violations that occur when an unauthorized switch tries to join a secure
fabric. The WWN of the unauthorized switch appears in the ERRLOG.
Security authentication failures
(SEC_AUTH_FAIL)
Authentication failures that occur when packets try to pass from a
nonsecure switch to a secure fabric.
TABLE 113
Fabric measures (Continued)
Measure
Description