Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 1458
1406
Brocade Network Advisor SAN User Manual
53-1003154-01
Generating SAN performance reports
35
iii. Select the ports (Ctrl or Shift + click to select multiple ports) from which you want to
gather performance data from the Available table and click the right arrow button.
The selected ports move to the Select Ports table.
iv. Click OK.
c. Select the historical period from which you want to gather performance data from the For
list.
If you select Custom, complete the following steps.
i.
Select the Last option and enter the number of minutes, hours, or days.
OR
Select the From option and enter the date and time.
ii. Click OK.
d. Select the granularity at which you want to gather performance data from the Granularity
list:
•
5 minutes for last 8 days.
•
30 minutes granularity for last 14 days
•
2 hour granularity for last 30 days
•
1 day granularity for last 730 days.
e. Select the measure by which you want to gather performance data from the Measures list.
To select more than one measure, click the Additional Measures expand arrows and select
the check box for each additional measure.
f.
Save this configuration by selecting Save.
The Save Favorites dialog box displays. This enables you to save the selected configuration
so that you can use it to generate the same type of report at a later date.
g. Enter a name for the configuration in the Favorites Name field and click OK.
h. Click Apply.
The selected report automatically displays in the View Reports dialog box.
NOTE
Hyperlinks in reports are active only if the source data is available.
To print the selected report, refer to
To export the selected report, refer to
To delete the selected report, refer to
4. Click the close button (X) to close the View Reports dialog box.
5. Click the close button (X) to close the HIstorical Performance Table dialog box.
For more information about performance, refer to