Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 80
66
Brocade Mobility RFS7000-GR Controller System Reference Guide
53-1001944-01
Switch file management
3
1. Refer to the Source field to specify the details of the source file. Use the From drop-down menu
and select Server.
2. Provide the name of the File.
3. Use the Using drop-down menu to configure whether the file transfer is conducted using SFTP.
SFTP transfers require a valid user ID and password.
4. Enter an IP Address of the server receiving the configuration file. Ensure the IP address is valid
or risk jeopardizing the success of the file transfer.
5. Enter the User ID credentials required to transfer the configuration file from the SFTP server.
6. Enter the Password required to send the configuration file from the SFTP server.
7. Specify the appropriate Path name to the target directory on the server. The Target options are
different depending on the target selected.
8. Use the To drop-down menu (within the Target field) and select Wireless Switch.
9. Use the Browse button to browse and select the location to store the file marked for transfer.
10. Click the Transfer button to complete the file transfer. The Message section displays the status
of the file transfer message.
11. Click Abort button any time during the transfer process to abort the file transfer.