Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 543)

Brocade Mobility RFS7000-GR Controller System Reference Guide 529
53-1001944-01
Configuring a Wireless IDS Deployment
C
10. Select Save (from the lower left-hand corner) to apply the changes.
Unauthorized AP Containment
Unauthorized AP containment can be enabled on the RF Switch to provide temporary remediation if
an unauthorized AP is placed at the site. Once enabled, the RF Switch provides RF
countermeasures against any unauthorized AP MAC addresses added to the containment list.
Switch Applet Configuration
The following configuration example demonstrates how to globally enable unauthorized AP
containment and contain an unauthorized AP using the switch UI applet.
1. From the switch menu tree select Security > Access Point Detection.
2. Select the AP Containment tab.