Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 481)

Brocade Mobility RFS7000-GR Controller System Reference Guide 467
53-1001944-01
Chapter
8
Diagnostics
In this chapter
This chapter describes the various diagnostic features available for monitoring switch
performance. This chapter consists of the following switch diagnostic activities:
• Displaying the main diagnostic interface
• Configuring system logging
• Debugging the applet
• Configuring a ping
NOTE
HTTPS must be enabled to access the switch applet. Ensure HTTPS access has been enabled before
using the login screen to access the switch applet.
Displaying the main diagnostic interface
The main diagnostic screen contains tabs assessing the performance of the following diagnostics:
• Switch environment
• CPU performance
• Switch memory allocation
• Switch disk allocation
• Switch memory processes
• Other switch resources
NOTE
When the switch’s configuration is successfully updated (using the Web UI), the effected screen is
closed without informing the user their change was successful. However, if an error were to occur,
the error displays within the effected screen’s Status field and the screen remains displayed. In the
case of file transfer operations, the transfer screen remains open during the transfer operation and
remains open upon completion (with status displayed within the Status field).
Switch environment
Use the Environment tab to view and modify the switch diagnostic interval, temperature sensors
and fan speeds.