Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 551)

Brocade Mobility RFS7000-GR Controller System Reference Guide 537
53-1001944-01
Configuring a Wireless IDS Deployment
C
13. Click Apply.
14. From within the Configuration tab, select the Allow Traps to be generated option then click
Apply.
15. Select Save (from the lower left-hand corner) to apply the changes.
SNMP traps for unauthorized APs and MU intrusion detection violations are forwarded to
RFMS.
RF Switch Running Configuration
The following is the running configuration on the RFS7000-GR controller used to create this
Wireless IDS tutorial:
RFS7000# show running-config
!
! configuration of RFS7000-GR version 4.1.0.0-040GR
!
version 1.2
!
!
aaa authentication login default local none
service prompt crash-info
!
username "admin" password 1 b6b6ccabdb85763872c7fbdf436ec2ed86bf931e
username "admin" privilege superuser
username "operator" password 1 b6b6ccabdb85763872c7fbdf436ec2ed86bf931e
!
!
!
spanning-tree mst configuration
name My Name
!
crypto pki trustpoint ESELAB
subject-name "rfs7000-GR" US "TN" "Johnson City" "Brocade Inc." "WLAN Enterprise
Division"
fqdn "rfs.eselab.com"
ip-address 192.168.10.14
!