Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 548)

534 Brocade Mobility RFS7000-GR Controller System Reference Guide
53-1001944-01
Configuring a Wireless IDS Deployment
C
Any MUs violating an event are listed in the table.
7. Select Save (from the lower left-hand corner) to apply the changes.
SNMP Traps
To alert users of unauthorized APs and intrusion events, an RFMS server should defined on the RF
Switch as an SNMP trap receiver, and the detection of unauthorized APs and intrusion detection
traps should be enabled. When the RF Switch detects an unauthorized AP, or a intrusion detection
violation, the switch forwards an SNMP trap to the RFMS server.
Switch Applet Configuration
The following configuration example demonstrates how to enable SNMP traps to an RFMS server
for unauthorized AP and MU intrusion detection violations:
1. From the switch menu tree select Management Access > SNMP Trap Receivers.
2. Select Add.