Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 200)

186 Brocade Mobility RFS7000-GR Controller System Reference Guide
53-1001944-01
Viewing Access Port Information
4
5. Click OK to save the changes.
6. Repeat steps 3 through 5 for each radio you wish to add to groups.
7. When you have finished adding radios to groups, click the Apply button on the Configuration
tab to save your changes.
8. To verify the radio groups click on the Groups tab to view configured radio groups. For more
information on viewing radio groups refer to “Viewing access point radio groups” on page 186.
Viewing access point radio groups
Refer to the Groups tab to view the Group IDand Index associated with each radio when added to a
WLAN.
To view existing radio group settings:
1. Select Network > Access Port Radios from the main menu tree.
2. Click the Group tab.
Group information displays per radio with the following data:
Viewing Active Calls (AC) statistics
To view Active Calls statistics:
Group Id Displays the Group Id associated with each adopted radio.
Radio Configured Index The Index is the numerical index (device identifier) used with the device radio. Use
this index (along with the radio name) to differentiate the radio from other device
radios.