Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 195)

Brocade Mobility RFS7000-GR Controller System Reference Guide 181
53-1001944-01
Viewing Access Port Information
4
3. Select a radio from the table and click the Edit button.
The Select Radio/BSS field displays the WLANs associated to each of the BSSIDs used by the
radios within the radio table. Use Select/Change Assigned WLANs field to edit the WLAN
assignment.
4. Select any of the WLANs from the table to unassign/disable it from the list of available WLANs.
5. Refer to the Status field for the current state of the requests made from applet. This field
displays error messages if something goes wrong in the transaction between the applet and
the switch.
6. Click the Apply button to save the modified WLAN assignment.
7. Click Close to exit the screen without committing updates to the running configuration.
Configuring WMM
Use the WMM tab to review each radio’s current index (numerical identifier), the Access Category
that defines the data type (Video, Voice, Best Effort and Background) as well as the transmit
intervals defined for the target access category.
To view existing WMM Settings: