Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 550)

536 Brocade Mobility RFS7000-GR Controller System Reference Guide
53-1001944-01
Configuring a Wireless IDS Deployment
C
8. In the All Traps tree, locate Wireless > AP Detection, then select the Unapproved AP detected
and Unapproved AP removed traps. Select Enable Trap.
9. Click Apply.
10. From the menu tree select Management Access > SNMP Trap Configuration.
11. Select the Configuration tab.
12. In the All Traps tree, locate Wireless > Intrusion Detection, then select the Excessive violation
from mobile unit, Excessive violation from radio and Excessive violation from switch traps.
Select Enable Trap.