Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 452)

438 Brocade Mobility RFS7000-GR Controller System Reference Guide
53-1001944-01
Configuring enhanced beacons and probes
6
1. Select Security > Enhanced Probe/Beacon Table from the main menu tree.
2. Select the Probes Found tab.
3. Refer to the following information as displayed within the Probes Found tab.
4. Select the Clear Report button to clear the statistic counters and begin a new data calculation.
Portal MAC Displays the MAC address of the unadopted MU picked detected by the Enhanced
Probes enabled AP.
MU MAC Displays the MAC address of the Enhanced Probe detected MU.
Signal Strength (dBm) Displays the signal strength when the unadopted MU was detected.
Heard Channel Displays the channel frequency used when the unadopted MU was detected.
Heard Time Displays the time the unadopted MU was detected.