Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 517)

Brocade Mobility RFS7000-GR Controller System Reference Guide 503
53-1001944-01
Establishing basic Adaptive AP connectivity
A
Sample switch configuration file for IPSec and independent WLAN
The following constitutes a sample switch configuration file supporting an AAP IPSec with
Independent WLAN configuration. Please note new AAP specific CLI commands in
red and relevant
comments in blue .
The sample output is as follows:
!
! configuration of RFS7000-GR
!
version 1.0
!
!
aaa authentication login default none
service prompt crash-info
!
hostname RFS7000-GR
!
username admin password 1 8e67bb26b358e2ed20fe552ed6fb832f397a507d
username admin privilege superuser
username operator password 1 fe96dd39756ac41b74283a9292652d366d73931f
!
!
To configure the ACL to be used in the CRYPTO MAP
!
ip access-list extended AAP-ACL permit ip host 10.10.10.250 any rule-precedence 20
!
spanning-tree mst cisco-interoperability enable
spanning-tree mst config
name My Name
!
country-code us
logging buffered 4
logging console 7
logging host 157.235.92.97
logging syslog 7
snmp-server sysname RFS7000-GR
snmp-server manager v2
snmp-server manager v3
snmp-server user snmptrap v3 encrypted auth md5
0x7be2cb56f6060226f15974c936e2739b
snmp-server user snmpmanager v3 encrypted auth md5
0x7be2cb56f6060226f15974c936e2739b
snmp-server user snmpoperator v3 encrypted auth md5
0x49c451c7c6893ffcede0491bbd0a12c4
!
To configure the passkey for a Remote VPN Peer - 255.255.255.255 denotes all AAPs.
12345678 is the default passkey. If you change on the AAP, change here as well.
!
crypto isakmp key 0 12345678 address 255.255.255.255
!
ip http server
ip http secure-trustpoint default-trustpoint
ip http secure-server
ip ssh
no service pm sys-restart
timezone America/Los_Angeles