Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 48)

34 Brocade Mobility RFS7000-GR Controller System Reference Guide
53-1001944-01
Accessing the switch Web UI
2
1. Point the browser to the IP address assigned to the wired Ethernet port (port 2). Specify a
secure connection using the https:// protocol.
The switch login screen displays:
2. Enter the Username admin, and Password admin123. Both are case-sensitive. Click the Login
button.
NOTE
If using HTTP to login into the switch, you may encounter a Warning screen if a self-signed certificate
has not been created and implemented for the switch. This warning screen will continue to display
on future login attempts until a self-signed certificate is implemented. Brocade recommends only
using the default certificate for the first few login attempts until a self-signed certificate can be
generated.
NOTE
If your password is lost, there is a means to access the switch, but you are forced to revert the switch
back to its factory default settings and lose your existing configuration (unless saved to a secure
location). Consequently, Brocade recommends keeping the password in a secure location so it can
be retrieved. For information on password recovery, see
“The chapters within this System Reference
Guide are arranged to be complimentary with the main menu items in the menu tree of the switch
Web UI. Refer to this content to configure switch network addressing, security and diagnostics as
required.”
on page 35.