Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 425)

Brocade Mobility RFS7000-GR Controller System Reference Guide 411
53-1001944-01
Configuring the RADIUS Server
6
Configuring RADIUS users
Refer to the Users tab to view the current set of users and groups assigned for the RADIUS server.
The Users tab is employed when Local is selected as the Auth Data Source within the
Authentication & Accounting tab. The user information is ignored if an LDAP server is used for
authentication.
To define the RADIUS user permissions for switch access:
1. Select Security > RADIUS Server from the main menu.
2. Select the Users tab.
3. Refer to the following to assess whether an existing user can be used with the local RADIUS
server as is, requires modification or if a new user is required.
4. Refer to the Available Groups field to view the memberships for existing users.
User ID Displays the username for this specific user. The name assigned should reflect the
user’s identity and perhaps their status within the switch managed network (guest
versus secure user).
Guest Displays whether a specific user has been defined as a guest user (with a green
check) or has been configured as permanent user. Guest users have temporary
access.
Group Name Displays the user group associated with each user in the list.
Start Date Defines the time when Guest User’s privileges commence.
Expiry Date If the user has been assigned guest privileges, they were also assigned a date
when their RADIUS privileges expire.
Access View the membership for the existing users displayed within the Users tab.