Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 405)

Brocade Mobility RFS7000-GR Controller System Reference Guide 391
53-1001944-01
Configuring IPSec VPN
6
7. Select an existing server and click the Delete button to remove it from list of available RADIUS
Servers. Only delete a server if its configuration does not provide a valid authentication
medium.
8. If you require a new RADIUS Server be configured, click the Add button.
Set this server’s designation as a primary or secondary RADIUS Server (using the checkboxes),
define the server IP address, port and shared secret password. Click OK when completed to
save the changes.
9. If the User Table checkbox was selected from within the Configuration field, select the User
Table tab to review the User Name and Passwords defined for use.
10. Click the Add button to display a screen used to add a new User and Password. Enter a User
Name and Password and confirm. Click OK to save the changes.
11. To change an existing user’s password, select the user from within the User Table and click the
Change Password button. Change and confirm the updated password.
12. If necessary, select an existing user and click the Delete button to remove that user from the
list available within the User Table.