Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 192)

178 Brocade Mobility RFS7000-GR Controller System Reference Guide
53-1001944-01
Viewing Access Port Information
4
5. Refer to the Traffic field for the following information :
6. Refer to the RF Status field for the following information :
7. Refer to the Errors field for the following information :
8. Click Refresh to update the content of the screen with the latest values.
9. Refer to the Status field for the current state of the requests made from applet. This field
displays error messages if something goes wrong in the transaction between the applet and
the switch.
10. Click Cancel to close the dialog without committing updates to the running configuration.
Pkts per second Displays the average total packets per second that cross the selected radio. The
Rx column displays the average total packets per second received on the selected
radio. The Tx column displays the average total packets per second sent on the
selected radio. The number in black represents this statistic for the last 30
seconds and the number in blue represents this statistic for the last hour.
Throughput Displays the average throughput in Mbps on the selected radio. The Rx column
displays the average throughput in Mbps for packets received on the selected
radio. The Tx column displays the average throughput for packets sent on the
selected radio. The number in black represents this statistic for the last 30
seconds and the number in blue represents this statistic for the last hour.
Avg Bit Speed Displays the average bit speed in Mbps on the selected radio. This includes all
packets that are sent and received. The number in black represents this statistic
for the last 30 seconds and the number in blue represents this statistic for the last
hour.
Non-unicast Pkts Displays the percentage of the total packets for the selected radio that are
non-unicast packets. Non-unicast packets include broadcast and multicast
packets. The number in black represents this statistic for the last 30 seconds and
the number in blue represents this statistic for the last hour.
Avg Station Signal Displays the average RF signal strength in dBm for all MUs associated with the
selected radio. The number in black represents this statistic for the last 30
seconds and the number in blue represents this statistic for the last hour.
Avg Station Noise Displays the average RF noise for all MUs associated with the selected radio. The
number in black represents this statistic for the last 30 seconds and the number in
blue represents this statistic for the last hour.
Avg Station SNR Displays the average Signal to Noise Ratio (SNR) for all MUs associated with the
selected radio. The Signal to Noise Ratio is an indication of overall RF performance
on your wireless network.
Avg Num of retries Displays the average number of retries for all MUs associated with the selected
radio. The number in black represents this statistic for the last 30 seconds and the
number in blue represents this statistic for the last hour.
% Gave Up Pkts Displays the percentage of packets the switch gave up on for all MUs associated
with the selected radio. The number in black represents this statistic for the last
30 seconds and the number in blue represents this statistic for the last hour.
% of Undecryptable
Pkts Displays the percentage of undecryptable packets for all MUs associated with the
selected radio. The number in black represents this statistic for the last 30
seconds and the number in blue represents this statistic for the last hour.