Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 60)

46 Brocade Mobility RFS7000-GR Controller System Reference Guide
53-1001944-01
Viewing switch port information
3
The port types are defined as follows:
The Port screen contains three tabs supporting the following port assessment activities:
• Viewing the port configuration
• Viewing the ports runtime status
• Reviewing port statistics
Viewing the port configuration
The Configuration tab displays the current configuration for the switch ports. Use the port
configuration information to determine whether an existing port configuration can be used as is or
requires modification for use within the switch managed network.
To view configuration details for the uplink and downlink ports:
1. Select Switch > Ports from the main menu tree.
2. Select the Configuration tab to display the following read-only information:
GE# GE ports are available on the Brocade Mobility RFS7000-GR Controller. GE ports
on the Brocade Mobility RFS7000-GR Controller can be RJ-45 or fiber ports which
support 10/100/1000Mbps.
ME# ME ports are available on the Brocade Mobility RFS7000-GR Controller platforms.
ME ports are out-of-band management ports which can be used to manage the
switch via CLI or Web UI even when the other ports on the switch are unreachable.