Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 65)

Brocade Mobility RFS7000-GR Controller System Reference Guide 51
53-1001944-01
Viewing switch port information
3
1. Select Switch > Ports from the main menu tree.
2. Select the Statistics tab.
3. Refer to the Statistics tab to display the following read-only information:
4. Select a port and click on Details button to see the detailed port statistics. For more
information, refer to “Detailed port statistics” on page 52.
5. Select a port and click on Graph button to view the port statistics in a graphical format. For
more information, refer to “Viewing the port statistics graph” on page 53.
Name Defines the port name. On the Brocade Mobility RFS7000-GR Controller the
available ports are named as follows:
Brocade Mobility RFS7000-GR Controller: ge1, ge2, ge3, ge4, me1
Bytes In Displays the total number of bytes received by the port.
Packets In Displays the total number of packets received by the port.
Packets In Dropped Displays the number of packets dropped by the port. If the number appears
excessive, a different port could be required.
Packets In Error Displays the number of erroneous packets received by the port. If the number
appears excessive, try using a different port and see if the problem persists.
Bytes Out Displays the total number of bytes transmitted by the port.
Packets Out Displays the total number of packets transmitted by the port. A low value could be
an indication of a network problem.
Packets Out Dropped Displays the total number of packets dropped during transmission. A high value
may be an indication of network throughput issue.
Packets Out Error Displays the total number of erroneous transmitted packets.