Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 354)

340 Brocade Mobility RFS7000-GR Controller System Reference Guide
53-1001944-01
Configuring firewalls and access control lists
6
Associating an ACL with WLAN
Use the Membership screen to define a name for the ACL index and map the index to WLANs (1-32)
requiring membership permission restrictions.
To associate a filter ACL index with a WLAN:
1. Select Security > Wireless Firewall from the main menu tree.
2. Click the Security Policy tab.
3. Click the Wireless Filters tab.
4. Select one or more of the existing ACLs from the filters list.
5. Click the Memberships button.
6. Select the box to the right of each WLAN you want associated with the ACL.
Selecting a WLAN maps it the MAC address range and allow or deny designation assigned to it.
Consequently, be sure you are not restricting MU traffic for a WLAN that requires those MAC
addresses to interact with the switch.
7. Refer to the Status field for the state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
8. Click OK to use the changes to the running configuration and close the dialog.
9. Click Cancel to close the dialog without committing updates to the running configuration.