Configuring management users, Configuring local users – Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 470
456
Brocade Mobility RFS7000-GR Controller System Reference Guide
53-1001944-01
Configuring management users
7
1. Select Management Access > SNMP Trap Receivers from the main menu tree.
2. Click the Add button at the bottom of the screen.
3. Create a new (non DNS name) destination IP address for the new trap receiver to be used for
receiving the traps sent by the SNMP agent.
4. Define a Port Number for the trap receiver.
5. Use the Protocol Options drop-down menu to specify the trap receiver as either a SNMP v3
receiver.
6. Click OK to save and add the changes to the running configuration and close the dialog.
7. Refer to the Status field for the current state of the requests made from applet. This field
displays error messages if something goes wrong in the transaction between the applet and
the switch.
8. Click Cancel to close the dialog without committing updates to the running configuration.
Configuring management users
Refer to the Users screen to view the administrative privileges assigned to different switch users.
You can modify the roles and access modes assigned to each user. The Users screen also allows
you to configure the authentication methods used by the switch. Use this screen for the following
permission configuration activities:
•
•
Configuring switch authentication
Additionally, the switch Web UI has the facility for creating guest administrators for creating guest
users with defined login periods to specific guest groups. For more information, see
Configuring local users
Refer to the Local Users tab to view the administrative privileges assigned to users, create a new
user and configure the associated roles and access modes assigned to each user.
To configure the attributes of Local User Details: