Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 202)

188 Brocade Mobility RFS7000-GR Controller System Reference Guide
53-1001944-01
Viewing Access Port Information
4
1. Select Network > Access Port Radios from the main menu tree.
2. Click the Mesh Statistics tab.
3. The following statistics are displayed:
Mesh Index Displays the numberical identifier assigned to each mesh member AP.
MAC Address Displays the Media Access Control(MAC) address for each Access Port.
Connection Type Displays the connection type for each Access Port.
Radio Index The Radio Index is a numerical value assigned to the radio as a unique identifier.
For example; 1, 2, or 3. The index is helpful for differentiating radios of similar type
and configuration.
Type Displays the radio type of the corresponding APs. Available type are:
•
802.11a
•
802.11an
•
802.11b
•
802.11bg
•
802.11bgn
Associated WLAN Displays the WLAN that each Access Port is associated to.
BB MAC Address Displays the BB MAC Address for each Access Port.
Throughput Mbps Throughput Mbps is the average throughput in Mbps on the selected Access Port.
ABS ABS is the average throughput in Mbps on the selected Access Port.
% Non-Uni % Non-Uni is the percentage of the total packets for the selected radio that are
non-unicast packets. Non-unicast packets include broadcast and multicast
packets.
Retries Displays the total number of retries for each Access Port.