Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 245)

Brocade Mobility RFS7000-GR Controller System Reference Guide 231
53-1001944-01
IGMP Snooping
4
1. Select Network > IGMP Snooping from the main menu tree.
2. Select the IGMP Snoop Config tab
The IGMP Snoop Config tab displays the following information:
IGMP Snoop Querier configuration
Use the IGMP Snoop Querier Config tab to view and configure IGMP Snoop Querier configuration).
Snoop Enable Select to enable IGMP Snooping on the switch. If disabled, snooping on a per VLAN
basis is also disabled.
Unknown Multicast
Forward Select to enable the switch to forward Multicast packets from unregistered
Multicast Groups. If disabled, Unknown Multicast Forward on a per VLAN basis is
also disabled.
Apply Click to Apply changes made to the running configuration.
Revert Revert back to previous state from the running configuration.
Vlan Index The VLAN index on which IGMP Snooping is enabled.
Snoop Enable The status of IGMP Snooping. Disabled for the selected VLAN if the screen displays
a red cross mark.
Unknown Multicast
Forward The status of forwarding IGMP Multicast packets from unregistered Multicast
Groups. Disabled for selected VLAN if the screen displays a red cross mark.
Learning Mode Indicates how the switch learns IGMP Snooping information. Can be one of
pimDvmrp or static.
Multicast Router Ports Lists the ports used for Multicast Routing. Can be one of the available ge ports.